Keywords: forklift safe Operation ten forbidden safe driving operation operator
First, safe driving operation:
1. Hold a license and do not drink and drive.
2. The operator must be familiar with the performance of the forklift, strictly abide by the rules of operation and use, non-forklift drivers are strictly prohibited to drive.
3. According to the regulations to check the vehicle, and the car's turn lights, horns and brake braking must be effective. And record in the equipment Daily inspection Record of the day.
4. The operation of cargo loading and unloading should be smooth and firm, the weight of the cargo must be evenly distributed between the two forklifts. The handle is placed in the middle stationary position. Two handles cannot be moved at the same time.
5. When the driver's front line of sight is blocked or handling large volume of goods, the forklift should be reversed at low speed. When the car is loaded with goods downhill, it must be in low gear and run at low speed.
6. Driving should be done: the fork distance from the ground 300~400mm, lifting fork to tilt back.
7. When driving in the factory, the speed should be less than 10km/h, and the speed limit should be 5km/h when loading goods and entering the workshop.
8. Parking should be pulled tight hand system, gear in neutral.
9. Park at designated parking space.
Second, the operation should abide by the "ten forbidden"
1.Do not raise the goods for long distance travel;
2. Do not use single fork operation;
3. Do not use the fork to pick over the pallet method unloading;
4. Do not use inertia unloading;
5. Do not use neutral or disengaging clutch coasting;
6. No overload operation;
7. Do not use braking inertia to slip round or easily rolling goods;
8. Do not use the fork to pull up buried objects;
9. Do not use the fork directly shovel dangerous goods, flammable and explosive goods;
10. It is not allowed to stand on the pallet fork, and it is strictly forbidden to stand under the fork after lifting the goods.
